Yamaha R-3

The Yamaha R-3 is an entry level sport motorcycle, designed to compete with rivals in 300 cc sector, such as the Kawasaki Ninja 300, Honda CBR300R, and KTM 390 series. It is designed as a well-balanced sport motorcycle, with some design similarity to R25, such as engine (which is bored out). With a low seat height, the windscreen sufficiently deflects the wind overhead.

The 321 cc performance-oriented engine is lightweight, powerful, and has a wide power band. Most of the power can be found from 7,000 rpm to redline (12,500 rpm approx.). The engine uses a downdraft induction fuel injection system and the 10-spoke cast aluminum wheels reduce unsprung weight. The cylinders are all-aluminum. For 2017, the YZF-R3 offers optional ABS. The 2018 Model has dual channel ABS and is EURO IV compliant.

You will find the worlds leading performance products here at Spears Enterprises/Spears Racing. The first Spears Racing Yamaha R-3 was built in early 2015 and was raced at the club level, since then Spears Racing has produced several winning combinations and is currently supporting racers in the USA and Around the world with their products.

  • Sale! SKF Fork Seals

    SKF Fork Seal Kit Yamaha R3 2015/2018

    Original price was: $41.99.Current price is: $39.99.

    They integrate a dust sealing lip to prevent dirt and water from contaminating suspension fluid with an oil sealing lip to prevent oil from escaping the fork.

    *Each SKF seal kit includes 1 oil seal + 1 dust seal. To rebuild both forks you need to order 2 seal kits*

  • STA-BIL Fogging Oil 12oz.

    STA-BIL Fogging Oil

    $7.99

    This fogging oil easily sprays on and coats internal engine components to prevent corrosion. Formulated to displace moisture from metal to protect engine, this product also lubricates the cylinder’s walls

  • STA-BIL Storage Fuel Stabilizer

    STA-BIL Storage Fuel Stabilizer

    $12.99

    Treating your gas with this fuel stabilizer prevents gum, varnish, rust, and corrosion in your fuel tank, all of which are costly to repair.

  • Tapered Steering Bearing Kit

    Steering Stem Tapered Bearing Kit Kawasaki Ninja 250/300/400/500/ZX400r, Yamaha YZFR-3/FZ/MT07/R7

    $69.99

    Replacing your OEM style steering bearings to a “Steering Stem Tapered Bearing Kit” is so important to Track Day/Racers who are looking for a more consistent feel on your front end.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Superbike Brake Line 90° Front Brake Caliper

    Superbike Brake Line 90° Front Brake Caliper

    $89.99

    Provides stronger lever feel and quicker stopping power because it creates better pressure to the caliper

    SP28-250-300-320-400 Superbike Install

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • ABS Delete Plug with Superbike Brake Line Kit

    SUPERBIKE BRAKE LINE KIT WITH ABS DELETE PLUG Kawasaki Ninja 400/500 Yamaha R3/R7

    Price range: $499.99 through $579.99

    Spears Racing now has an ABS Delete Plug with Superbike Brake Line Kit, already made up for your convenience, these are for the Kawasaki Ninja 400/Z400 Yamaha YZFR-3 and Yamaha YZFR-7.This will allow you to remove your ABS system and have the best Braking system for Track Days and Racing.

    For off-road track use ONLY! This product is legal in California only for racing vehicles which may never be used, registered or licensed for use upon a highway
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Motorcycle Swingarm Spools

    Swing Arm Spools

    Original price was: $29.99.Current price is: $24.99.

    These spools are CNC machined from Aluminum. Rust-proof  mounting hardware are included.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Titanium Banjo Bolt Bleeder Assembly 

    Titanium Banjo Screw Bleeder Single/Double 10mm x 1.0/10mm x 1.25

    Original price was: $34.99.Current price is: $29.99.

    Easily install a bleeder screw anywhere in your brake or clutch system! This special banjo bolt has a 6mm bleeder screw so you can bleed air out of the system directly at the master cylinder instead of pumping the air all the way through to the caliper

    The ultimate solution for “Hard to bleed brake systems”

    Must know your Thread Pitch:
    Most of the Japanese OEM(Stock) master cylinders are M10 x 1.25
    European and Brembo styles master cylinders are M10 x 1.0

    Every Titanium Banjo Bolt Bleeder Assembly comes with copper crush washers.

     

    *** Each part is based on single item***

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Titanium race drilled magnetic drain bolt M12X1.5X15

    TITANIUM RACE DRILLED MAGNETIC DRAIN BOLT M12X1.5X15

    Original price was: $34.95.Current price is: $29.99.

    The Titanium race drilled magnetic drain bolt M12X1.5X15 is one of the best way to reduce the mass on any small race bike.The Magnetic Drain Bolt bolt has an Embedded HIGH TEMP NEODYMIUM MAGNETS  which holds metal engine shavings to keep your oil clean. Includes Aluminum crush washer for Proper Installation.

    Lightweight Grade 5 Titanium
    – Pre-Drilled for easily added safety wire
    – Magnetic Insert to catch any passing debris

  • Sale! TITANIUM RACE DRILLED SINGLE BANJO BOLT

    TITANIUM RACE DRILLED SINGLE BANJO BOLT M10x1.25/ M10X1.0

    Original price was: $24.99.Current price is: $19.99.

    Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy. Superior strength, weight and corrosion resistance compared to steel hardware. Our titanium products are manufactured to the highest quality standards and are priced very competitively.

    Single Banjo Fine Thread M10x1.0 SP28-Titanium Drilled Banjo Bolt 10×1.0 (All Brembo products, OEM European Equipment)
    Single Banjo Coarse Thread M10x1.25 SP28-Titanium Drilled Banjo Bolt 10×1.025 (Japanese Equipment)

     

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Spears Racing Titanium 10 m x1.25 Nuts

    Titanium Sprocket Nut 10 m x 1.25 Nuts 10 m x 1.25 Nuts

    Price range: $39.99 through $49.99

    M10x1.25 nuts This is a kit of 6 Nuts, A replica of manufacturers original design but in superior quality material. Our Titanium 6AL-4V (grade 5) bolts are highly corrosion resistant, extremely light (45% weight saving!) and with rolled threads offers excellent strength and quality.Machined 5mm hex head to install each stud

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! VALVE SHIM KIT 7.48 MM DIAMETER

    VALVE SHIM KIT 7.48 MM DIAMETER /PRECISION GROUND 141 SHIMS

    Original price was: $129.99.Current price is: $119.99.

    These kits are expertly manufactured to OEM specifications with Forged from 4140 steel to ensure long service life, each shim is heat treated and precision ground to exact sizes
    The perfect complement to any service or race engine.

  • Sale! Yamaha R3 Velocity Stacks

    Velocity Stacks Yamaha YZF-R3/MT-03 Superbike/Supersport 2015/Current

    Price range: $369.99 through $462.99

    The OEM Air box on the Yamaha R3 contains two different length velocity stacks, one long, one short and  a small intake tracks which limits the air intake into the engine, again remember this is a commuter designed motorcycle.

    Dyno proven gains don’t lie! Developed in house on simulation software, the race track and hours on the dyno.

    Snap Stacks Yamaha R3 assembly Install

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Ventilated Caliper Racing Pistons

    Ventilated Caliper Racing Pistons

    Price range: $144.99 through $439.98

    But they’re still using problematic aluminum pistons – lightweight, yes, but also highly conductive in providing a huge heat path into the hydraulics

     

    Ventilated Caliper Racing Pistons Install

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Vortex Adjustable Rearsets V3 2.0 Yamaha YZFR3 2015/2021

    Vortex Adjustable Rearsets V3 2.0 Yamaha R3 2015/Current

    Original price was: $519.99.Current price is: $499.99.

    The redesigned V3 2.0 Rear set features a 16 position rotatable foot peg with laser engraved position markers. This makes finding your ideal riding position a breeze. No longer are the foot pegs mounted directly to the main body of the rear set, which allows each foot peg to be replaced without removing the heel guard or main body.

    Vortex Racing adjustable rear sets are perfect for increasing rider comfort and confidence.

    Install Instructions

    Adjustment Instructions

     

  • Yamaha YZF-R3 Rear Sets Woodcraft

    Woodcraft/CFM Black Rear Sets Yamaha R3 2015/Current

    $459.99

    Install

    This kit can be used in either standard or GP shift position with a shift rod change