TITANIUM RACE DRILLED SINGLE BANJO BOLT M10x1.25/ M10X1.0

$19.99

Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy. Superior strength, weight and corrosion resistance compared to steel hardware. Our titanium products are manufactured to the highest quality standards and are priced very competitively.

Single Banjo Fine Thread M10x1.0 SP28-Titanium Drilled Banjo Bolt 10×1.0 (All Brembo products, OEM European Equipment)
Single Banjo Coarse Thread M10x1.25 SP28-Titanium Drilled Banjo Bolt 10×1.025 (Japanese Equipment)

 

Description

TITANIUM RACE DRILLED SINGLE BANJO BOLT m10x1.25/ M10X1.0

Upgrade your brake and clutch plumbing with our Titanium high flow Banjo bolts! Our banjo bolts are manufactured for pure performance and reliability. Made from Aircraft Spec Grade 5 Titanium, 40% lighter than steel drilled for Safety Wire High Flow Fluid orifice with a 20% increase in fluid channel volume.

Single with fine M10x1.0 or coarse M10x1.25 thread are available.

Part numbers:

Single Banjo Fine Thread M10x1.0 SP28-Titanium Drilled Banjo Bolt 10×1.0 (All Brembo products, OEM European Equipment)
Single Banjo Coarse Thread M10x1.25 SP28-Titanium Drilled Banjo Bolt 10×1.25 (Japanese Equipment)
Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy. Superior strength, weight and corrosion resistance compared to steel hardware.
Our titanium products are manufactured to the highest quality standards and are priced very competitively.

Note: For Brembo calipers and master and slave pumps use fine thread pitch at 1.00mm. For most Japanese bikes use coarse thread pitch at 1.25mm

 

Each TITANIUM RACE DRILLED SINGLE BANJO BOLT  will come with two (2) 10X14X1.5 copper crush washers.