Yamaha R-3

The Yamaha R-3 is an entry level sport motorcycle, designed to compete with rivals in 300 cc sector, such as the Kawasaki Ninja 300, Honda CBR300R, and KTM 390 series. It is designed as a well-balanced sport motorcycle, with some design similarity to R25, such as engine (which is bored out). With a low seat height, the windscreen sufficiently deflects the wind overhead.

The 321 cc performance-oriented engine is lightweight, powerful, and has a wide power band. Most of the power can be found from 7,000 rpm to redline (12,500 rpm approx.). The engine uses a downdraft induction fuel injection system and the 10-spoke cast aluminum wheels reduce unsprung weight. The cylinders are all-aluminum. For 2017, the YZF-R3 offers optional ABS. The 2018 Model has dual channel ABS and is EURO IV compliant.

You will find the worlds leading performance products here at Spears Enterprises/Spears Racing. The first Spears Racing Yamaha R-3 was built in early 2015 and was raced at the club level, since then Spears Racing has produced several winning combinations and is currently supporting racers in the USA and Around the world with their products.

  • Checkered Flag Mask are all handmade, hand washable, reusable. 100% cotton. They are 2 ply, with nose guard for a sure fit for your nose, elastic to adhere around your ears for a comfortable fit

    Checkered Flag Mask 2 ply

    $12.00

    Checkered Flag Mask are all handmade, hand washable, reusable. 100% cotton. They are 2 ply, with nose guard for a sure fit for your nose, elastic to adhere around your ears for a comfortable fit

  • Sale! Yamaha R3 Clutch Bypass 2109

    Clutch By Pass Plug Yamaha R3 320cc 2019/2024

    Original price was: $24.99.Current price is: $21.99.

    This plug will allow you to remove your current turn signal housing assembly left Handlebar Assembly.

     

  • Sale! Yamaha R3 Clutch Bypass 2015

    Clutch By Pass Plug Yamaha R3 2015/2018

    Original price was: $21.99.Current price is: $19.99.

    This plug will allow you to remove your current turn signal housing assembly left Handlebar Assembly

  • Sale! Cryo'd Front/Rear Yamaha YZFR-3 Axles 2015/Current

    Cryo-Treated & Micro-Polished Front/Rear Axles for Yamaha YZF-R3 (2015–Current)

    Original price was: $229.99.Current price is: $219.99.

    Micro Polishing very gently polishes and smooths all surfaces and removes metal stresses uniformly. It gently polishes the Metal in the contact zones

  • Sale! D.I.D 415 ERZ Master Links

    DID 415 ERZ Master Links Racing Chain Rivet/Clip Style

    Price range: $4.75 through $6.49

    A D.I.D 415 ERZ Master Links or quick-release link is a roller chain accessory that allows convenient connection and disconnection of a chain without the need for a chain tool. It acts as a set of the chain’s outer plates, so joining two sets of the chain’s inner plate ends. Such master links may or may not be re-usable.(Rivet Style)

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! DID 415ERZ chain

    DID 415ERZ 134 links Motorcycle Drive Chain

    Original price was: $144.99.Current price is: $139.99.

    Purchase the correct/proper chain for your motorcycle, not like others companies who are selling 120 link chains they are just telling you to get two (2) master links.

    DID 415ERZ chain has a tensile strength of 4,540 lbs ( 1 lb. 15.7 oz./898.6g )

  • Sale! DID 415ERZ chain

    DID 415ERZ 144 links Motorcycle Drive Chain

    Original price was: $169.99.Current price is: $149.99.

    Why convert from 520 to 415
    A 520 chain is heavier and larger than a race bike in this class needs. Moving to 415 cuts pitch size, chain mass, and usually sprocket mass with it. That is rotating weight at the countershaft and rear wheel. Extra rotating mass takes more energy to accelerate and throws away horsepower as friction. A 415 chain reduces that loss so more power reaches the ground and the bike picks up revs faster.

    On Ninja 250/300/400/500 KTM 390 and R3 race bikes, a 415 conversion is one of the most effective ways to shed drivetrain weight. The smaller chain also packs tighter, which helps when you are building a dedicated track or Moto3-style machine. Pair the chain with a 415 conversion kit (sprockets and related hardware) for the full weight and friction benefit.

    DID 415ERZ chain has a tensile strength of 4,540 lbs ( 1 lb. 15.7 oz./898.6g )

  • Sale! DID 520 ERT3 Chain

    DID 520 ERT3 Racing Drive Chain 120 links

    Price range: $7.99 through $207.98

    Using the lightest chain with a high tensile strength is what we have done to provide the best ratio for the little bike race world

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! D.I.D 520 ERV7 Racing Chain

    DID ERV7 520 Racing Chain ER Series Exclusive 120 Link

    Original price was: $349.99.Current price is: $319.99.

    The Grand Prix spec certified by MotoGP, the drive chain 520ERV7 dedicated to the race is finally released.

    Tensile Strength Increase – A slight jump from the ERV3, the ERV7 boasts a 3% higher tensile strength due to inner side plates and thicker pins.
    Longer Chain Life – Due to increased X-Ring durability, the ERV7 sees a 13% wear resistance increase from the previous ERV3.
    Reduced Friction – Because of the X-Ring improvements, the ERV7 will have less friction than the ERV3.

     

  • Domino ROAD-RACING GRIPS

    Domino ROAD-RACING GRIPS

    $29.99

    The Domino Racing  grips are 125mm (open ends) and work with most of our street throttle tubes.
    Dual compound grip designed with hard and soft compounds for road race conditions
    Dimpled pattern for sure grip and lasting comfort Used by more MotoGP teams than any other grip

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Domino XM2 Adjustable Race Throttle Kit Yamaha YZFR-3

    DOMINO XM2 ADJUSTABLE RACE THROTTLE KIT – Yamaha YZFR-3 2015/Current

    Price range: $89.99 through $409.97

    The Domino throttle controls are all built according to the most modern production processes, solid, robust and very precise, they are the right choice as a spare part or as an upgrade to the oem throttle control of your bik

    Customize to pick your grip color

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Yamaha R3 Fairing stay 2015/2018

    Front Fairing Stay Aluminum Yamaha YZF R-3 2015/2018

    Original price was: $249.99.Current price is: $239.99.

    This fairing stay comes with mounting /dzus fasteners for quick release.

  • Sale! Yamaha R3 Fairing stay 2019/Current

    Front Fairing Stay Aluminum Yamaha YZF R-3 2019/Current

    Original price was: $249.99.Current price is: $239.99.

    This fairing stay comes with mounting  fasteners for quick release.

  • Gas Tank Foam- Anti Slosh Foam- Fuel Tank Foam

    Gas Tank Foam- Anti Slosh Foam- Fuel Tank Foam

    $39.99

    Prevent fuel sloshing and keep the Motorcycle handling predictably with our Fuel Tank Safety Foam Blocks. When undergoing cornering or hard acceleration and braking, fuel sloshing about in the tank produces unpredictable weight transfer and may adversely affect your handling. Our fuel cell foam blocks keep weight transfer to a minimum, with just a minimal loss in fuel capacity.

    Spears-Foam

  • 1.6 Radiator caps

    High Pressure Radiator Cap 1.6 KG. Spears Racing

    $29.99

    Raises the boiling point by 25 degrees when going from a stock 1.1 kg/cm2 (15.7  psi) radiator cap to the 1.6 kg/cm2 (22.75 psi) radiator cap.The radiator cap allows pressure to build up in the cooling system and will eventually vent that pressure to the overflow bottle as the need arises. The cap does this by a spring loaded valve which serves as a pressure relief valve at a rated pressure.

  • Sale! HM Quickshifter Plus

    HM Plus Quickshifter

    Price range: $539.99 through $599.99

    The HM Range is designed to simply be plug and play. Each HM Product is designed to be simple to install, so there is no need for costly fitment or dyno set up time.

    Simple yet effective, perfect for your track days and race tracks.

    *** You will need to get a New Shift Rod***

    Install

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page