Kawasaki EX300

The Kawasaki Ninja EX300cc  is based on the Ninja 250R, a lightweight and inexpensive sport bike in production for over three decades.Like the Ninja 250R, it has a full fairing, but a wider rear tire, 140/70, than the instead of 130/70 on the 250R.The Ninja 300 also has 5 spoke wheels, neutral finder, and optional (ABS).By comparison with the 250R, the Ninja 300 also has a slightly smaller fuel tank, taller gearing, and a back-torque-limiting slipper clutch with an assist mechanism that decreases clutch lever effort. Despite being a sport bike, it has comfortable ergonomics (such as mid-position foot controls and an upright seat) which promote commuting.

Performance:

The Kawasaki Ninja EX300cc has a 296 cc (18.1 cu in. ) straight-twin engine Dynamometer tests showed that the Ninja 300 produces more power with 39.95 hp (29.79 kW) compared with the 250’s 25.48 hp (19.00 kW), and higher torque across the rev range at 18 to 13.57 lb⋅ft (24.40 to 18.40 N⋅m).

Its top speed has been recorded at 180 km/h (112 mph) and acceleration at 5.6 seconds from 0 to 97 km/h (0 to 60 mph), and around 14.5 seconds at 141.14 to 145.77 km/h (87.7 to 90.58 mph) in the quarter mile. 

The Ninja 300’s fuel economy was measured at around 70 mpg‑US (3.4 L/100 km; 84 mpg‑imp), while other sources reported it at 54.1 mpg‑US (4.35 L/100 km; 65.0 mpg‑imp), though regardless of the methodology, the 300 showed improved gas mileage over the Ninja 250R.

  • Tapered Steering Bearing Kit

    Steering Stem Tapered Bearing Kit Kawasaki Ninja 250/300/400/500/ZX400r, Yamaha YZFR-3/FZ/MT07/R7

    $69.99

    Replacing your OEM style steering bearings to a “Steering Stem Tapered Bearing Kit” is so important to Track Day/Racers who are looking for a more consistent feel on your front end.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Stomp grip Kawasaki Ninja 250/300 2012/2017-Traction Pad Tank Kit

    Stomp grip Kawasaki Ninja 250/300 2012/2017-Traction Pad Tank Kit

    Original price was: $69.99.Current price is: $64.99.

    Stompgrip uses proprietary plastic blends that it develops together with local producers to best fit the needs of each genre of its customers. Stompgrip also uses the highest quality adhesives available on the market from respected suppliers like 3M and Avery.

    Stompgrip-installation-instructions_traction-kits

     

  • Superbike Brake Line 90° Front Brake Caliper

    Superbike Brake Line 90° Front Brake Caliper

    $89.99

    Provides stronger lever feel and quicker stopping power because it creates better pressure to the caliper

    SP28-250-300-320-400 Superbike Install

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Motorcycle Swingarm Spools

    Swing Arm Spools

    Original price was: $29.99.Current price is: $24.99.

    These spools are CNC machined from Aluminum. Rust-proof  mounting hardware are included.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Titanium Banjo Bolt Bleeder Assembly 

    Titanium Banjo Screw Bleeder Single/Double 10mm x 1.0/10mm x 1.25

    Original price was: $34.99.Current price is: $29.99.

    Easily install a bleeder screw anywhere in your brake or clutch system! This special banjo bolt has a 6mm bleeder screw so you can bleed air out of the system directly at the master cylinder instead of pumping the air all the way through to the caliper

    The ultimate solution for “Hard to bleed brake systems”

    Must know your Thread Pitch:
    Most of the Japanese OEM(Stock) master cylinders are M10 x 1.25
    European and Brembo styles master cylinders are M10 x 1.0

    Every Titanium Banjo Bolt Bleeder Assembly comes with copper crush washers.

     

    *** Each part is based on single item***

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Brake Pin Titanium Kawasaki Ninja 250_300_400_500cc Race Spec

    Titanium Brake Caliper Pad Pin Kawasaki Ninja 250/300/400/500cc M10x(1.00mm) Race Spec Pack x2

    Original price was: $44.95.Current price is: $39.99.
    • The issue of removing the OEM soft steel brake pin with the 5mm Allen tool with steady pressure of the tool, the inner part of the bolt rounds off /strips and you have to drill the bolt out, or in most cases you just replace the brake caliper.
      The Spears Titanium brake pin caliper bolt has two ways to remove the bolt, designed to accept an 8mm socket or a 4mm Allen tool, the biggest advantage for street or racing is the 6ea x 1.5 drilled holes for safety wire’
    • Forged body + rolled threads – Maximizes structural integrity and fatigue life under repeated high-load cycles
    • Pre-drilled head for lockwire – Factory race-drilled for safety-critical applications (brake calipers, suspension, etc.)
    • Integrated flange – Eliminates the need for separate washers and provides even load distribution

     

    • OEM Brake pin weighs -16g
    • Spears Titanium weighs-10g (Mind you that this unit is longer and has more material)

     

    Sold in set of two (2ea)

  • Sale! Titanium race drilled magnetic drain bolt M12X1.5X15

    TITANIUM RACE DRILLED MAGNETIC DRAIN BOLT M12X1.5X15

    Original price was: $34.95.Current price is: $29.99.

    The Titanium race drilled magnetic drain bolt M12X1.5X15 is one of the best way to reduce the mass on any small race bike.The Magnetic Drain Bolt bolt has an Embedded HIGH TEMP NEODYMIUM MAGNETS  which holds metal engine shavings to keep your oil clean. Includes Aluminum crush washer for Proper Installation.

    Lightweight Grade 5 Titanium
    – Pre-Drilled for easily added safety wire
    – Magnetic Insert to catch any passing debris

  • Sale! TITANIUM RACE DRILLED SINGLE BANJO BOLT

    TITANIUM RACE DRILLED SINGLE BANJO BOLT M10x1.25/ M10X1.0

    Original price was: $24.99.Current price is: $19.99.

    Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy. Superior strength, weight and corrosion resistance compared to steel hardware. Our titanium products are manufactured to the highest quality standards and are priced very competitively.

    Single Banjo Fine Thread M10x1.0 SP28-Titanium Drilled Banjo Bolt 10×1.0 (All Brembo products, OEM European Equipment)
    Single Banjo Coarse Thread M10x1.25 SP28-Titanium Drilled Banjo Bolt 10×1.025 (Japanese Equipment)

     

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Spears Racing Titanium 10 m x1.25 Nuts

    Titanium Sprocket Nut 10 m x 1.25 Nuts 10 m x 1.25 Nuts

    Price range: $39.99 through $49.99

    M10x1.25 nuts This is a kit of 6 Nuts, A replica of manufacturers original design but in superior quality material. Our Titanium 6AL-4V (grade 5) bolts are highly corrosion resistant, extremely light (45% weight saving!) and with rolled threads offers excellent strength and quality.Machined 5mm hex head to install each stud

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Universal Linear Steering Damper 70mm Stroke

    Universal Linear Steering Damper 70mm Stroke

    Original price was: $319.99.Current price is: $269.99.

    The Universal Linear Steering Damper has a 70mm stroke and is fully adjustable and can be adjusted in 32 positions to help you find best controlling. The twin-tube clamp ensures that the clamping force of the tube clamp does not obstruct the piston.  Heat expansion reservoir prevents the forming of air bubbles. No dust will be able to get in with the triple function seals which ensures that dust can not enter and oil can not exit.

    Spears-Damper-Owners1119-Manual

    Spears-steering-70mdamper-manual

  • Sale! VALVE SHIM KIT 7.48 MM DIAMETER

    VALVE SHIM KIT 7.48 MM DIAMETER /PRECISION GROUND 141 SHIMS

    Original price was: $129.99.Current price is: $119.99.

    These kits are expertly manufactured to OEM specifications with Forged from 4140 steel to ensure long service life, each shim is heat treated and precision ground to exact sizes
    The perfect complement to any service or race engine.

  • Sale! Ventilated Caliper Racing Pistons

    Ventilated Caliper Racing Pistons

    Price range: $144.99 through $439.98

    But they’re still using problematic aluminum pistons – lightweight, yes, but also highly conductive in providing a huge heat path into the hydraulics

     

    Ventilated Caliper Racing Pistons Install

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sale! Vortex Adjustable Rearsets Kawasaki Ninja 250r/300cc 2013/2017

    Vortex Adjustable Rearsets Kawasaki Ninja 250r/300cc 2013/2017

    Original price was: $519.99.Current price is: $459.99.

    Vortex Racing adjustable rear sets are perfect for increasing rider comfort and confidence.

    Install Information

     

  • Sale! Vortex clip ons

    Vortex Clip Ons 7° Angle Kawasaki EX300-2013/2017

    Original price was: $199.99.Current price is: $189.99.

    They are machined from solid billet with a removable handlebar.

  • Sale! Woodcraft/CFM Black Rear Sets Kawasaki Ninja EX300

    Woodcraft/CFM Black Rear Sets Kawasaki Ninja EX300

    Original price was: $499.99.Current price is: $469.99.

    The rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits are complete with our CFM 3 piece billet shift and brake pedals.

    This kit can be used in either standard or GP shift position with a shift rod change

    300 install