RJL ZZ high performance racing brake pads give you powerful braking at the track. Price is for one card. Enough pads to service one caliper.
***Sold per caliper***
The Ceramic Wheel Bearings Yamaha YZF-R7 kit are ceramic balls in these hybrid bearings are over 60% lighter than their steel counterparts resulting in faster acceleration and reduced inertial loads
Low Friction-Less Vibration the coefficient of friction for the ceramic balls is an average of 3x’s lower than steel.
One of the advantages of ceramic balls is that they remove the problem of two identical materials breaking each other down. Because ceramic bearings are harder than steel bearings, they are more durable, lasting anywhere from five to 20 times longer. This also equals an almost zero risk of bearing seizure
This design is laser precision cut and masterfully contoured to fit your Yamaha R3 with out any holes to be drilled into your swing arm as most other shark fins on the market.
“Often Imitated Never Duplicated”
Yamaha YZFR-3 Rear Brake Pad Compression Spring is designed to lesson rear brake drag/pressure on the pads when you are on your Yamaha R3.
Rolling resistance on these little motorcycle is everything and is so critacal,anything that can assist this is a plus for more potential speed.
Yamaha YZFR-3 Superbike CNC Ported Cylinder Head will make your Yamaha YZFR-3 an unbelievable little bike that feels like the ultimate superbike.
This is a complete New Cylinder Head with all New Yamaha Parts
CNC machined billet aluminum captive wheel spacers allow for faster and easier wheel and tire changes. Stop fumbling with spacers and pinching your fingers! Great for all racers and track day riders! This innovative design is machined according to Data the Spears Racing has collected, and is race proven. The Front kit weighs 182 grams less than stock and the rear kit weighs 210 grams less than stock this lessens your unsprung/rotating weight.
The Switch is a direct plug in to your OEM wiring harness, this switch will replace your current ignition key switch and the OEM right handed control housing .This encapsulated waterproof switch is epoxied and equipped with Military spec wire to minimize potential vibration and harsh environments- water- dirt- and dust.
All parts are made in USA
Fresh rings are a key component when building a high performance engine. We offer a selection of rings for every piston style and diameter. If you are unsure what rings you require for your stock or overbore pistons
Piston Rings form the critical seal between the piston and the cylinder wall.
2 SETS REQUIRED FOR 1 Engine
The replacement of OEM rubber brake lines with high quality stainless steel versions is a popular aftermarket upgrade for every style of rider. Those who are looking for the most solid brake feel under normal and extreme conditions consider stainless lines to be a necessity, and often change them after the very first outing with OEM lines
The CNC Aluminum Start-Stop Switch is a direct plug in to your OEM wiring harness, this switch has the capability of replacing the OEM Start Switch and still run the factory Ignition Key switch or this switch will replace your current ignition key switch and the OEM right handed control housing by adding the jumper plug included in the kit. This encapsulated waterproof switch is potted with epoxy and equipped with Military spec wire to minimize potential vibration and harsh environments- water- dirt- and dust.
All parts are made in USA
The CNC 3 Button Aluminum Start-Stop-Rain Switch is a direct plug in to your OEM wiring harness, this switch has the capability of replacing the OEM Start Switch and still run the factory Ignition Key switch or this switch will replace your current ignition key switch and the OEM right handed control housing by adding the jumper inside the switch. This encapsulated waterproof switch is potted with epoxy and equipped with Military spec wire to minimize potential vibration and harsh environments- water- dirt- and dust.
***All backorders will be filled in 5 to 7 days***
All parts are made in USA
This engine kit is “Approved Kit “ for MotoAmerica
Spears Racing continuous committed to excellence to advance as the industry changes. This commitment has resulted in more forgings specific to certain applications, proprietary treated wrist pins and piston rings manufactured only for us. Spears Racing Yamaha R3 Race Piston kit have been winning races and Championships all over the world, this piston designs.
These Pistons make more than the Yamaha Factory GYTR Pistons
The CNC 3 Button Aluminum Start-Stop-Rain Switch is a direct plug in to your OEM wiring harness, this switch has the capability of replacing the OEM Start Switch and still run the factory Ignition Key switch or this switch will replace your current ignition key switch and the OEM right handed control housing by adding the jumper plug included in the kit. This encapsulated waterproof switch is potted with epoxy and equipped with Military spec wire to minimize potential vibration and harsh environments- water- dirt- and dust.
All parts are made in USA
Most of the other bodywork companies only worry about building their product cheap to allow the cost to be the same, Lacomoto Prides their kits to be Perfect, Light and stylish
Complete kit weight between 9lbs and 9.5 lbs
Comes Pre-drilled and with DZUS Receptacles already installed.
Comes with Tail and Belly Pan fittings.
Black or (White Gelcoat Special Order) finish available.
Radiator Shroud and Front Fender added to the kit.
No products in the cart.
International Postal service disruptions
International Mail Service Suspensions
Updated: Oct. 1, 2021
The Postal Service™ is temporarily suspending international mail acceptance for certain destinations due to impacts related to the COVID-19 pandemic and other unrelated service disruptions.
Suspension Due to Unavailability of Transportation
| Afghanistan | Guadeloupe | New Zealand** | Tajikistan |
| Australia* | Laos | Reunion (Bourbon) | Timor-Leste |
| Bhutan | Libya | Saint Pierre and Miquelon (Miquelon) | Turkmenistan |
| Brunei | Martinique | Samoa | Yemen |
| Cuba | Mayotte | South Sudan | French Guiana |
| Mongolia | Syria |
Customers: please refrain from mailing items addressed to the countries listed here, until further notice.
These service disruptions affect Priority Mail Express International® (PMEI), Priority Mail International® (PMI), First-Class Mail International® (FCMI), First-Class Package International Service® (FCPIS®), International Priority Airmail® (IPA®), International Surface Air Lift® (ISAL®), and M-Bag® items.
*Australia’s service disruption affects Priority Mail International® (PMI), First-Class Package InternationalService® (FCPIS®), Commercial ePacket (CeP), International Priority Airmail® (IPA®) packets, InternationalPriority Airmail® (IPA®) M-Bags, International Surface Air Lift® (ISAL®) packets, International Surface Air Lift®(ISAL®) M-Bags, and Airmail M-Bags.
**New Zealand’s service disruption affects Priority Mail International® (PMI), First-Class Package International Service® (FCPIS®), Commercial ePacket (CeP), International Priority Airmail® (IPA®) packets, International Priority Airmail® (IPA®) M-Bags, International Surface Air Lift® (ISAL®) packets, International Surface Air Lift® (ISAL®) M-Bags, and Airmail M-Bags.
Unless otherwise noted, service suspensions to a particular country do not affect the delivery of military and diplomatic mail.
