Suzuki SV650 Straight Clutch Cable 1999/2008

Description

SV650 Straight clutch cable this is a custom Clutch cable developed by Spears Racing for a track day/Race bike and can work on your “stock street bike”, this cable will work with the stock handle bars or “Clip Ons”.

Your current OEM/Stock Clutch Cable’s end that goes into your clutch perch has a preformed metal bend and it will after time bind and will break. This is why the SV650 Straight clutch cable is straight and no longer has the metal bend, this will allow the cable to last longer and have a better pull. (1999/Current)

The cable is made with 2mm internal cable and has a Delron cover at the end that goes into your clutch lever at the other end it has two(2) 12mm nuts(same as OEM) and not like a lot of other aftermarket cables with 13 or 14mm nuts. The complete outer black is covered with a sliding black cover to assist from and heat or potential binding in tight areas/race fairings.

Before you install your SV650 Straight clutch cable we recommend that you lube the cable and also add a slight amount of grease onto the end going into your clutch perch. Always make sure that you check your clearances to the left and to the right as you rotate your handlebars or clip ons.

This is a Clutch cable developed by Spears Racing for a “stock street bike” or a track day/race bike, this cable will work with the stock handle bars or “Clip Ons” This is a better built cable that will last longer and have a better pull.

This cable is used by racers and race teams all around the world

Spears Racing has been designing and making race products for decades, their continuous committed to excellence to advance as the industry changes. This commitment has resulted in more components specific to certain applications, proprietary products only manufactured for us. Each of these aspects has been put through stringent research and development stages to ensure that our product will exceed your standards.