3 Button CNC Aluminum Start-Stop-Rain Switch with Integrated Keyswitch Elimination Harness Kawasaki Ninja 400 2018/Current

The CNC 3 Button Aluminum Start-Stop-Rain Switch is a direct plug in to your OEM wiring harness, this switch has the capability of replacing the OEM Start Switch and still run the factory Ignition Key switch or  this switch will replace your current ignition key switch and the OEM right handed control housing  by adding the jumper plug included in the kit. This encapsulated waterproof switch is potted with epoxy and equipped with Military spec wire to minimize potential vibration and harsh environments- water- dirt- and dust.

 

All parts are made in USA

$249.99$269.99

Description

Spears Racing along with APX Racing USA have come together to create this new Keyswitch Elimination Harness with a 3 Button CNC Aluminum Start-Stop-Rain Switch for the Kawasaki Ninja 400cc, this switch is a must when you replace the OEM Throttle housing with an aftermarket throttle kit like the Domino XM2 Adjustable Race Throttle .The housing is a Military Grade 6061 aluminum machined with fine details ,with rolled threads to allow more torque/tightening to your clip on with a black hard anodized finish.

The CNC Aluminum Start-Stop Switch Kawasaki Ninja 400cc will eliminate the OEM Key Switch, thus allowing the new switch to be the new on and off, this is for close course /racing built motorcycles. The third button “Blue” is an on/off switch that will control your rear rain light by a simple push. The switch assembly comes with new snap connectors and wire connectors for a clean install.

The three button switch is made with the worlds best products, starting with the premium Hall effect gold plated contact surfaces domed shaped buttons manufactured in the United Stated by Otto Engineering. These switch units will come with Titanium fasteners for lightness and anti corrosion.

The CNC 3 Button Aluminum Start-Stop-Rain Switch  is a direct plug in to your OEM wiring harness, this switch has the capability of replacing the OEM Start Switch and still run the factory Ignition Key switch or  this switch will replace your current ignition key switch and the OEM right handed control housing  by adding the jumper plug included in the kit. This encapsulated waterproof switch is potted with epoxy and equipped with Military spec wire to minimize potential vibration and harsh environments- water- dirt- and dust.

A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike which has a combined throttle and switch housing. Therefore replacement of throttle housing necessitates replacement of the switch. Product picture depicts our switch alongside a Domino XM2 forged quick turn throttle. This setup saves room on the handlebar and is much more resilient and durable in case of a crash.

L.E.D. Rear Rain Light

These powerful waterproof 5 Diode red L.E.D. Rear Racing light is perfect for the rear of any race motorcycle. Their all weather reliability increase visibility in all traffic conditions.
Features
Bright waterproof 5 Diode red L.E.D. Rain light.
All weather reliability increases visibility in all traffic conditions
Slim, compact design
Specifications
Product length: 3 15/16″
Product width: 11/16″
Product height: 7/8″

Spears Racing has been designing and making race products for decades, their continuous committed to excellence to advance as the industry changes. This commitment has resulted in more components specific to certain applications, proprietary products only manufactured for us. Each of these aspects has been put through stringent research and development stages to ensure that our product will exceed your standards.

Additional information

Weight 1.0 lbs
Choose an option

,

Reviews

There are no reviews yet.

Be the first to review “3 Button CNC Aluminum Start-Stop-Rain Switch with Integrated Keyswitch Elimination Harness Kawasaki Ninja 400 2018/Current”