ABS Delete Plug Kawasaki Ninja 400/ZX400rr 2018/Current

Description

NEW GENERATION DESIGN!! Kawasaki Ninja 400/ZX400rr ABS Delete

Our ABS delete modules allow you to seamlessly remove the factory ABS pump without impacting other rider aids like quick-shifter and traction control.

These delete modules are robust and field test-able (LED lights for Front, Rear, and Network status) as well as field update-able as firmware updates are released.

These modules save slightly more than 3lbs of weight over the factory ABS pump as well as precious space on the bike.

Aftermarket direct (master->caliper) brake lines are required for use with this delete module.

This module is a suitable replacement for the following OEM ABS Pump part numbers (contact us for others): 16082-0769, 16082-0785, 16082-0787, 16082-0810, 16082-0831, 16082-0889

FTECU’s 2018/current Kawasaki Ninja 400/ZX400rr ABS Delete unit allows you to completely remove the factory ABS system without triggering major error codes while saving much needed weight for race applications where the ABS is not needed. This unit allows you to remove the ABS pump assembly while saving much needed weight for race applications when the ABS is not needed.

This is the latest generation version with an improved construction both inside and out that can easily withstand the heat and vibration of race use! The new ABS Delete’s outer shell design replicates the construction of the stock OEM ABS pump housing plug fitting, so it clips onto the stock harness plug just like the stock unit for a secure and weather-proof connection.
FTECU Kawasaki Ninja 400/ZX400rr ABS Delete allows you to remove the factory ABS system completely without error codes on your Ninja’s dash and keeps the speedometer operational. For off-road track use ONLY! .

The Flash Tune ABS Delete Plus should be installed on any Ninja 400 that has had the ABS system eliminated. This allows you to remove the ABS module and BPMV from the bike which save 1.55 lbs and frees up space under the air box. Installing a set of Spears Racing Brake Lines will replace the ABS OEM Brake Lines.

For off-road track use ONLY! This product is legal in California only for racing vehicles which may never be used, registered or licensed for use upon a highway

Spears Racing has been designing and making race products for decades, their continuous committed to excellence to advance as the industry changes. This commitment has resulted in more components specific to certain applications, proprietary products only manufactured for us. Each of these aspects has been put through stringent research and development stages to ensure that our product will exceed your standards.