Kawasaki Ninja EX400 Exhaust Bracket/Rear Brake Reservoir Delete Kit with Titanium Hardware 2018/Current
Designed to allow you to remove the passenger footpeg /exhaust bracket and their extra weight and still properly mount your exhaust in the factory location
12 in stock
Spears Racings Exhaust Bracket Kawasaki EX400/Rear Brake Reservoir Delete Kit: Designed to allow you to remove the passenger footpeg /exhaust bracket and their extra weight and still properly mount your exhaust in the factory location. This bracket is compatible with the oem exhaust or any aftermarket slip-on or full system exhaust.
These exhaust hanger brackets are laser cut from 4mm lightweight 6061 aluminum,tumbled for no sharp edges and laser engraved with our Spears Racing logo. They feature a suede/satin black anodized finish.Titanium hardware to mount to the Subframe is included.
The OEM right side passenger peg weighs 525g/1.15Lbs the Spears bracket weighs 130g/.286 oz with Titanium Hardware that is almost 1 lb savings and over 2 lbs when you remove the left side passenger footpeg assembly.
Exhaust Bracket Kawasaki EX400 will also include the Spears Racing Rear Brake Reservoir Delete Kit,The OEM master cylinder reservoir assembly weights 70g/.154 oz the Spears Unit weights 15g/.033 oz
From higher elevation of several thousand feet to the track @ sea level, the rear brake would drag, so we new that the atmospheric pressure is different, our new unit has a Patented one way valve that will not allow this to happen.
Rear Brake Fluid Reservoir Delete Kit: This lightweight alternative product will provides the same function and safety as the stock unit, without the extra bulk. Spears Racing developed this kit by using Tygon tubing, which will resists cracking, sweating, or corrosion, even when housing harsh brake fluids and a patented one way valve to allow your brake system not to be sensitive to altitude or outside heat . Most race teams and track bikes run a setup exactly like this to provide a function and low profile reservoir that doesn’t add unnecessary weight to their setup.
Kit Contains the Following:
1 ea. Muffler/Exhaust bracket
2 ea. Titanium mounts bolts
1 ea. Tygon 5/16″ I.D. x 7/16″ O.D. x 1/16″ Wall
2 ea. Spring Clamps
1 ea. Patented 1 way Breather valve