Kawasaki Ninja EX400 Wheel bearing Seal Kit 2018/Current

Spears Racing is has put together wheel bearing seal kits for your kawasaki Ninja EX400 Wheel bearing Seal Kit 2018/Current, these kits will be sold as a pair( front) and (rear) , you will be able to order just what you need.

$12.99$32.98

Description

Spears Racing is has put together wheel bearing seal kits for your kawasaki Ninja EX400 Wheel bearing Seal Kit 2018/current, these kits will be sold as a pair( front) and (rear) , you will be able to order just what you need.

Material selection is important to the life of a wheel  seal. The elastomer’s resistance to temperature, abrasion, chemicals, weather, sunlight, and ozone can affect a profile’s longevity and performance.

Buna is one of the most widely used O-Ring and seals elastomer compounds. Buna is a Nitrile compound. The actual name is Acrylonitrile-Butadiene and can be referred to as Buna, Nitrile or NBR

These seals are medium pressure nitrile seals. These seals are primarily used to seal grease and lubricating oils up to 50 PSI at temperatures from -40 degrees F to +250 degrees F. Seals should be lubricated during installation for best results.

Oil seals, often called a rotary shaft seal or grease seal, closes the gap between stationary and moving components in mechanical equipment — most often rotating shafts — helping prevent lubricant escape and stopping harmful materials, such as dirt, from moving in through the clearance.

Nitrile (NBR) Oil Seal: 70 durometer (+/- 5)
Benefits of Buna (Nitrile)
good wear resistance,
good compression set resistance,
good short-term resilience, and
good permeation resistance

Ninja EX400 Wheel bearing Seal Kit are made in the USA

Additional information

Weight .75 lbs
Choose an option

, ,

Reviews

There are no reviews yet.

Be the first to review “Kawasaki Ninja EX400 Wheel bearing Seal Kit 2018/Current”