Suzuki SV650 +1mm Over Piston Rings

Kawasaki Ninja Stock Bore Piston Rings 296.0cc

Kawasaki Ninja 300 296cc/Std Bore piston rings are designed for the Spears Racing SP01-300 Racing piston Kit.

2 SETS REQUIRED FOR 1 Engine

Piston Info

$39.99

SKU SP01-300 296cc rings Categories ,

Description

Spears Racing Stock Bore High Comp Piston Rings Kawasaki Ninja 296.0cc Piston Rings form the critical seal between the piston and the cylinder wall. A delicate balance exists between proper sealing for maximum power and minimum blow by, and the correct amount of pressure on the cylinder wall to minimize drag which can lead to power loss and excess wear. Additionally the rings help to carry oil up and down the cylinder wall. Fresh rings are a key component when building a high performance engine. We offer a selection of rings for every piston style and diameter. If you are unsure what rings you require for your stock or overbore pistons, please contact us before ordering.

Piston Rings Kawasaki Ninja 296.0cc

Top ring is 0.8mm thick alloy steel, ferrox coated, and chrome faced.

2nd ring is 0.8mm nodular iron, phosphate coated and taper faced.

Oil ring is 1.5mm thick and a 3 piece assembly – stainless steel flex vent spacer, with chrome faced rails.

Proper end gaps may need to be set before installation.

FOR USE IN CAST IRON AND NIKISIL CYLINDER BORES

Spears Racing has been designing and making race products for decades, their continuous committed to excellence to advance as the industry changes. This commitment has resulted in more components specific to certain applications, proprietary products only manufactured  for us. Each of these aspects has been put through stringent research and development stages to ensure that our product will exceed your standards.

 

Designed for the Spears Racing Pistons

Additional information

Weight .5 lbs

Reviews

There are no reviews yet.

Be the first to review “Kawasaki Ninja Stock Bore Piston Rings 296.0cc”

Related products