HM Machined Aluminum Shift Rods

 

HM Shift rods are special DUAL thread, which means that you can screw a right or a left thread onto any side of the rod or shifter and come only in 6mm female thread.

Shift Rods are in Different Length

If ordering for a HM Superlite please deduct 60mm of the length of the rod, if ordering for the HM Plus/HM Plus SS/HM GP please deduct 55mm off your original length before you order

 

$24.99$49.99

Description

HM Shift Rods 6mm

As the Leader in Quickshifters in the Motorcycle World, HM Quickshifters has done it again they have produces a product like no other. All HM Shift Rods 6mm are specially machined to be able to accept the right handed or left handed grub screws on both ends this  special DUAL thread process is called  (Jeweled), which means that you can screw a right or a left thread into either side of the rod or shifter and these rods only comes in 6mm female threaded end. If there is any need to use a 8mm rose buds but you can use the HM 6m x 8m  Adaptor 

*Available in anodized black only and all  Shift Rods are in Different Length

If ordering for a HM Superlite please deduct 60mm of the length of the rod.

 HM Plus/HM Plus SS/HM GP please deduct 55mm off your original length of the current shift rod assemble before you order the new shift rod.

If there are any questions you might have figuring the proper length of the new shift rods , please do not hesitate to contact us here at Spears Enterprises.

Additional information

Weight .2 lbs
Shift Rod

, , , , , , , , , , , , ,

Reviews

There are no reviews yet.

Be the first to review “HM Machined Aluminum Shift Rods”