Yamaha YZF-R3 “Wurx” Titanium Axle Nut Kit M14/M16 With Washers Kit 2015/Current

Description

Spears Racing’s “Wurx” Titanium Front and Rear Axle Nut Kit  Our Titanium 6AL-4V (grade 5) Nuts/washers are highly corrosion resistant, extremely light (45% weight saving!) and with rolled threads offers excellent strength and quality. These nuts are an extra visual in the design and a bigger weight saving over OEM Nuts and Washers

“Wurx” M14 Front Axle Nut Kit/Washer

M14 x 1.5 Titanium Flange Nut, Hex Head: 19 mm, Flange Diameter: 26.0 mm,Height:14.0 mm, weight: .40 oz./11g 

M15 x 31OD Flat washer: ID 15m  OD 31m Thickness 1.6m, Weight:  .10 oz. /3g

“Wurx” M16 Rear Axle Nut Kit/Washer

M16x1.5 Titanium Flange Nut, Hex Head: 21mm,Flange Diameter: 28.0mm,Height: 14.0mm, weight: .45 oz./13g

M17x 31OD Flat washer: ID 17m OD 31m Thickness 2m, weight:  .15 oz. / 4g

“Wurx” Titanium Front and Rear Axle Nut Kit Is made with the Weight reduction and the Appeal to the eye.

For decades titanium was considered an “aerospace metal” and was used exclusively in this application. As time went on, the corrosion properties of the metal were explored in non-aerospace applications, specifically as a tubing product used in heat exchangers for power generation. This application proved to be extremely successful and the “industrial” market was created.

All of the Spears Titanium products are Grade 5, also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4, is the most commonly used alloy. It has a chemical composition of 6% aluminum, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium. It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties (excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti). Among its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld and fabricability.

*​Titanium is as strong as steel, but 45% lighter
*Titanium is 30% more elastic than steel
*Titanium is resistant to salt water, perspiration and acids.
*Titanium has a “low magnetic signature” reducing visibility to metal detectors
*Titanium does not become magnetized
*Titanium can only be worked with extremely hard tools
*Titanium has an extremely high melting point of 1800 degrees Celsius
*Titanium is believed to be the earth’s crust’s 9th most common element (about 0.6%)
*Titanium does not occur in nature as a metal