Febur Auxiliary Radiator Yamaha YZFR-3 2015/Current

Description

Febur has created this Yamaha YZFR-3 Auxiliary Radiator kit approved for World SSP300 class to use in connection with your oem stock radiator .The Febur’s radiators lower the temperatures thanks to the increased surface area, the best quality of the materials and careful studies and design to achieve the best performance. Febur Radiators are hand made from Aluminum in Italy and are used by many professional Teams in Europe and around the world.

These Systems are used to Keep the operating temperatures of the engine optimum by lowering the water temperature due to the increased water volume and surface airflow which in turn will prevent the engine performance from loosing power due to high temperatures. When your race bike reaches high temperatures the engine loses power but with this secondary radiator the temperatures remain steady and without sudden changes. These Febur Radiators radiators lower the temperature from 6 to 15 degrees, depending on the motor of the bike and weather conditions.

Racing bikes are continuously pushed to their max, and will therefore generate a lot of heat. When the engine gets too hot, it loses power and engine wear will occur much quicker. To make sure your bike gets the cooling it needs, you can install this additional water radiator. The triangle shaped radiator fits directly under the original radiator, is already equipped with stone protection and gets delivered in a complete kit.

These radiators come with hoses, and a protector to cover the surface area against debris. In most cases the hoses will need to be cut to size so we recommend that these are installed by an experienced mechanic, Care has to be taken as to not too close to exhaust headers or necessary precautions used such as heat shield materials or exhaust wrap installed if needed

This is highly recommended for any motorcycle that has any engine work  (Spears Racing 2mm over Engine Kit )or you are racing in a warm Climate.

Upper width 30cm, lower width 16cm

**This kit is designed to fit with racing fairings and race exhaust.**
  **The cooling fans will need to be removed from your race bike.**

This Yamaha YZFR-3 Auxiliary Radiator is approximately  1kg /2.20462 total weight with the three  silicon hoses which are included.

Febur  Yamaha YZFR-3 Auxiliary Radiator Kit contains:

1ea. Yamaha YZFR-3 Auxiliary Radiator

1ea. Radiator Guard

3ea. Hoses (Blue)

8ea. Hose Clamps

2ea. Aluminum Joints(one with Bleeder)

2ea Febur Brackets